Most building materials enquiries start with one question: “Can you give me a price?”
But an accurate quote starts with understanding the job. The more your supplier knows up front, the fewer follow-up calls you’ll need, and the easier it is to compare quotes like for like.
Whether you’re ordering insulation, plasterboard or drylining accessories, here are the five details worth including in your next enquiry, plus a checklist you can copy into your next email.
In short
Tell your supplier what the material is for, the exact product, sizes and quantities, when and where it needs to be delivered, and what information you need with the quote. If anything is still provisional, say so.
1. What is the material being used for?
Start with the application. Is it for a roof, floor, external wall or internal partition? Is the project a new build, a refurbishment or an extension?
The application narrows down which products are suitable. Insulating a pitched roof between rafters is a different conversation to insulating a floor under screed, or lining an internal wall that needs a fire or acoustic rating.
If a product has already been specified, include the full product name, manufacturer, reference and any relevant specification details, such as thickness, thermal conductivity (lambda value) or fire rating.
If you need help identifying a product, say so at the outset. It gives your supplier a clearer starting point, and our sales and technical teams can talk through the application with you.
2. What quantities and dimensions do you need?
Include sizes alongside quantities: thickness, board dimensions, roll sizes or lengths. “100 sheets of 100mm PIR” could mean several different board sizes, and each is priced differently.
Be clear about the unit you want the price in:
- Per board or sheet, for rigid products such as PIR insulation, insulated plasterboard or plasterboard
- Per pack or pallet, if you’re ordering in full packs
- Per roll or per m², for quilts such as fibreglass or stone wool insulation
- Per length, for metal studs and tracks or beads and trims
If your quantities are provisional or taken from drawings rather than a site measure, flag that too. These details help make sure everyone is pricing the same requirement.
3. When do you need it?
“Needed on site Monday” and “needed sometime in spring” are very different enquiries.
Include your target delivery date, and say whether you need the full order in one delivery or materials for separate project stages, for example insulation for first fix and plasterboard a few weeks later.
If your programme is still developing, share the expected timeframe. That way availability and delivery requirements become part of the conversation early, rather than a surprise later.
4. Where is it going?
Provide the delivery address and Eircode, along with any known access restrictions. Details worth raising before an order is confirmed include:
- Restricted delivery hours or site delivery windows
- Narrow roads, tight entrances or limited vehicle access
- How materials will be unloaded, and whether there’s equipment on site to help
- Where materials can be stored safely once they arrive
The delivery location is part of the brief, not an admin detail to add at the end. Where and how materials are stored on arrival matters too: see our guide to site storage and handling mistakes.
5. What information needs to accompany the quotation?
Think about what you need to review the offer or move the order forward. That might include:
- Product data sheets
- A clear breakdown of quantities and unit prices
- Delivery charges
- Confirmation of the exact product being quoted
If you’re comparing quotations, check that the product references, sizes, quantities and delivery arrangements line up. Any proposed alternative should be clearly identified, so it can be reviewed by the appropriate project team, such as your architect, engineer or specifier.
Example: a vague enquiry vs a clear one
Here’s the same job described two ways.
Vague enquiry
“Hi, can I get a price for PIR insulation and plasterboard for an extension? Thanks.”
Result: several follow-up questions before a price can be given, and quotes from different suppliers that are hard to compare.
Clear enquiry
“Hi, looking for a quote for a single-storey rear extension in Naas, Co. Kildare (Eircode included).”
- Walls: 100mm PIR boards, 2400 x 1200mm, approx. 45 boards (from drawings, not yet measured on site)
- Ceiling: 12.5mm plasterboard, 2400 x 1200mm, 60 sheets
- Timing: insulation week of 9 March, plasterboard about three weeks later
- Access: narrow lane, no forklift on site
- Please include: data sheets and delivery charges
The second enquiry can be priced accurately first time, and the gaps (like the provisional quantities) are flagged up front.
Your quote request checklist
Copy this into your next enquiry:
- Application: roof, floor, wall or partition; new build, refurb or extension
- Product: name, manufacturer, reference and spec, or ask for help choosing
- Sizes: thickness and board, roll or length dimensions
- Quantities: plus the unit (per board, pack, roll, m² or length), and whether they’re provisional
- Timing: target delivery date, one delivery or phased
- Delivery: address, Eircode and any access restrictions
- Information needed: data sheets, quantity breakdown, delivery charges
Frequently asked questions
Can I get a quote without a full specification?
Yes. You don’t need every answer before you get in touch. Tell us what’s confirmed and what still needs clarifying, and our sales and technical teams can help you find the relevant products and information.
How are insulation and plasterboard usually priced?
It depends on the product. Rigid boards such as PIR insulation and plasterboard are usually priced per board or per pack, while insulation rolls are often priced per roll or per square metre. Say which unit you want so quotes are easy to compare.
Why do two quotes for the same job look so different?
Usually because they aren’t pricing exactly the same thing. Check that the product reference, thickness, dimensions, quantities, units and delivery charges line up, and look out for any alternative products that have been proposed.
Can a supplier suggest an alternative product?
Yes, but any alternative should be clearly identified in the quotation so it can be reviewed by the appropriate project team, such as your architect, engineer or specifier, before it’s ordered.
What’s the best way to send U Value my enquiry?
Send your materials list, drawings or specification through our Talk to Sales page, or call us on +353 1 861 2000.
A clearer brief starts a better conversation
You don’t need to have every answer before contacting your supplier. Identifying what’s confirmed, and what still needs clarification, is a useful place to start.
At U Value, our sales and technical teams can discuss your requirements and help you find the relevant product information, from insulation and plasterboard to drylining and fire protection.
Planning your next order? Send us your materials list, specification or initial enquiry, and let’s start the conversation.
